TREATMENT REGIMEN

Ram Biochemicals

Prime Award: DE-FC26-04NT42098

Sub-award: 3688-RAMBI-DOE-2098

 

 

The Fee Unit is composed of one injection well and 7 producing wells.  Produced water is held in a 90 bbl tank and re-injected periodically when the tank is full.  It takes approximately 1 day to inject the 90 bbls of lease water.  There is direct connectivity from the injector to the Fee #7 approximately 800 ft East.  Fracture channeling is evidenced by the amount of re-injected water produced at the Fee #7 compared to the adjoining Fee wells. 

    Initial Treatment - Enhanced Waterflood: [5/25/2010]

  • Mix 110 gallons MEOR treatment fluid with 60 BBLS injection water in the holding tank and inject through existing injection system [5/25/2010]
  • Shut in the production wells and injection well for 24 hours
  • Produce the Fee lease wells and gauge total fluid production for two to three weeks
    Second treatment - Enhanced Waterflood:

  • After 3-4 weeks, re-inject a 50 gallon slug of Wel-Prep through the injection system
  • Produce the Fee wells and gauge total fluid production for two three weeks

NOTE: Second treatment may be configured for a continuous feed of We-Prep treatment fluid into the injection system at levels of 1/2  to 2 percent

 


Pretreatment Production



HOME | RAM History | FAQ's | Contact Us |